Choosing A Control Head |
|
 |
 |
Fleck 2510 |
Fleck 7000 Digital |
| The Fleck 2510 is the basic mechanical head, offering lower cost, automatic backwashing control over your system. Offering stronger backwash rates than lower end heads and a 12 day timer, this head is ideal for those looking for the best combination of price and quality. | The Fleck 7000 digital control head offers easier user interface, higher efficiency and larger connection sizes. The easy to use LCD display and touch pad controls makes setup simple, while the modular design makes maintenance a breeze! The digital circuit board is more efficient, moving through the cycles quicker than the mechanical head, conserving water. Available connection sizes up to 1.5". |
| Fleck 2510 Specs | |
| Valve Specs | |
| Valve Material | Fiber reinforced polymer |
| Inlet/Outlet | 3/4" or 1" |
| Cycles | 5 |
| Flow Rates (50 psi inlet - Valve Alone | |
| Continuous (15 psi drop) | 19 GPM |
| Peak (25 psi drop) | 24 GPM |
| CV (flow @ 1 psi drop) | 4.8 GPM |
| Max. Backwash | 17 GPM |
| Regeneration | |
| Downflow/Upflow | Downflow Only |
| Adjustable Cycles | Yes |
| Time Available | 164 Minutes |
| Dimensions | |
| Distributor Pilot | 1.05" O.D. |
| Drain Line | 1/2" O.D. |
| Mounting Base | 2.5" - 8NPSM |
| Height from top of tank | 7.5" |
| Additional Information | |
| Electrical Rating | 24v, 110v, 220v - 50Hz, 60Hz |
| Max. VA | 72 |
| Estimated Ship Weight | 7 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 - 125 psi |
| Temperature | 34° - 110° |
| Fleck 7000 Specs | |
| Valve Specs | |
| Valve Material | Fiber reinforced polymer |
| Inlet/Outlet | 1" or 1.25" NST or BSP 1", 1.25", or 1.5" sweat |
| Cycles | Up to 6 |
| Flow Rates (50 psi inlet - Valve Alone | |
| Continuous (15 psi drop) | 35.8 GPM |
| Peak (25 psi drop) | 46 GPM |
| CV (flow @ 1 psi drop) | 9.2 GPM |
| Max. Backwash | 31.3 GPM |
| Regeneration | |
| Downflow/Upflow | Downflow Only |
| Adjustable Cycles | Yes |
| Time Available | 199 Minutes per cycle |
| Dimensions | |
| Distributor Pilot | 1.05" or 32 mm |
| Drain Line | 3/4" or 1" NPT Quick connect |
| Mounting Base | 2.5" NPSM |
| Height from top of tank | 7.9" |
| Additional Information | |
| Electrical Rating | 24 VAC, 50/60Hz |
| Max. VA | 15 |
| Estimated Ship Weight | 11 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 - 125 psi |
| Temperature | 34° - 110° |