Pyrolox Iron, Sulfur, & Manganese Filters with Fleck 7000 or 2510 Control Heads

To speak to a water quality specialist call:
1-888-661-9769

Pyrolox Iron, Sulfur, & Manganese Filters with Fleck 2510 or Fleck 7000 Control Heads
Pyrolox Fleck 2510 Installation Instructions	Pyrolox Fleck 7000 Installation Instructions

Pyrolox Fleck 2510

The number one system for treating and removing iron and sulfur from your water. Iron causes a lot of staining and hydrogen sulfide (sulfur) gives you that rotten egg odor. Manganese is another of the big stainers leaving black stains. The Pyrolox system is an all natural mined ore that oxidizes the iron, sulfur, and manganese from your water changing it to a form that can be trapped and filtered out. The Pyrolox is a very dense media that then traps the oxidized iron and sulfur holding it in the filter media until the control head automatically backflushes to clean itself.

Completely automatic, once installed and set there is nothing left to do except enjoy your new clear, clean, odor and stain free water! Local water dealers sell these same systems for $1100 or more, but we ship to you direct from the manufacturer, cutting costs and saving you money! These systems are complete, and include the tank, media, control head and bypass valve, all you have to do it set it up and plumb it in!

Pyrolox Iron, Sulfur, & Manganese Filters - How They Work

Pyrolox works on the principle of a catalyst reaction, but itself remains relatively unchanged. This reaction is accompanied with the formation of intermediate compound or compounds, such as higher oxides of manganese. By alternate composition and decomposition of these oxides, the Pyrolox is left unchanged. Pyrolox works on a principle whereby the hydrogen sulfide, iron, and manganese are actually oxidized in the media and simple backwashing cleans the bed. Pyrolox is very dense and heavy and stops the oxidized solid form of iron, manganese, and hydrogen sulfide from proceeding any further through the media (anything greater than 20 microns). Since the Pyrolox media is so dense and heavy, high backwash rates are required to clean the media. No chemical regeneration is required and nothing is imparted into the drinking water.

Pyrolox Fleck 7000

Pyrolox works equally well on three main classes of water:

Those waters which begin to precipitate hydrogen sulfide, iron and manganese on exposure to air, usually hard water containing carbonates, sulfates, or both.
Those waters which will hold hydrogen sulfide, iron, and manganese in solution indefinitely, even when chlorinated and/or aerated. These elements usually combine with organic acids and appear in colloidal form.
Those waters which contain hydrogen sulfide, iron, and manganese, or all, in each of the above forms and therefore deposit a part, but not all, of the element after aeration, chlorination or ozone, and cannot be removed entirely by simple filtration.

Pyrolox is a logical alternative to chlorination, greensand, birm and filox when used for hydrogen sulfide, iron, and manganese.

Pyrolox has also proven to be an excellent compliment to aeration, chlorination, and ozone. Pyrolox acts not only as a turbidity filter, but also a polishing filter for any breakthrough of hydrogen sulfur, iron, or manganese with the use of aeration.


Click Here to see Fleck Control Head Specifications
Features:
Structural USA tank (number 1 rated tank in the USA) High iron and sulfur capacity Pyrolox media Gravel bed for equal water dispersion Digital Fleck 7000 OR Mechanical Fleck 2510 Control 1” Riser, basket distributor, upper basket Choice of Connection Options Calibrated flow control for proper backwashing Removes iron up to 10 ppm Removes sulfur up to 4 ppm	Removes manganese up to 4 ppm No chemicals to use, once set up, all automatic! General turbidity filter to remove dirt, sand, cloudy water Removes rotten egg odor, sulfur odor Complete installation instructions Phone and e-mail support 5 year warranty on control head 10 year warranty on tank 120v power supply

Pyrolox 0.5 Filter System Low Flow System for homes with 1 bathroom & 1-2 people Fleck Control Head 9"x48" Tank 0.5 ft.³ Pyrolox Media Flow Rates: Service: 2.2 - 7 GPM Backwash: 6 - 10 GPM Price: Fleck 2510: $509 Fleck 7000: $549 Qty.	Pyrolox 1.0 Filter System Standard System for homes with 2 - 3 bathrooms & 2-4 people Fleck Control Head 9"x48" Tank 1.0 ft.³ Pyrolox Media Flow Rates: Service: 2.2 - 10 GPM Backwash: 8 - 10 GPM Price: Fleck 2510: $629 Fleck 7000: $669 Qty.
Pyrolox 1.5 Filter System High Flow System for homes with 3-4 bathrooms & 3-7 people Fleck Control Head 10"x54" Tank 1.5 ft.³ Pyrolox Media Flow Rates: Service: 2.7 - 12 GPM Backwash: 10 - 17 GPM Price: Fleck 2510: $759 Fleck 7000: $799 Qty.	Pyrolox 2.0 Filter System Larger System for homes with 4 - 5 bathrooms & 5-9 people Fleck Control Head 12"x52" Tank 2.0 ft.³ Pyrolox Media Flow Rates: Service: 3.9 - 15 GPM Backwash: 12 - 17 GPM Price: Fleck 2510: $869 Fleck 7000: $909 Qty.

Abundant Flow Water Systems Inc.
PO Box 13, 2261 Schoenchen Rd. Pfeifer, KS 67660 | Tel: 785-735-9769 Fax: 785-735-9589 | Email us at sales@abundantflowwater.com
Abundant Flow Water Systems Inc.©Copyright 2008, all rights reserved

Pyrolox Iron, Sulfur, & Manganese Filters with Fleck 2510 or Fleck 7000 Control Heads

Pyrolox Fleck 2510 Installation Instructions

Pyrolox Fleck 7000 Installation Instructions

Pyrolox Fleck 2510

Pyrolox Iron, Sulfur, & Manganese Filters - How They Work

Pyrolox Fleck 7000